TX3 is a rapid set, high strength low viscosity concrete repair material designed to repair spalled concrete,
cracked concrete, and for filling pin holes and small surface defect treatment on concrete floors before polishing. This two part, 1:1 system is 100% solids can also be used for rebuilding and repairing broken control joints, voids under concrete or tile, as well as injection into cracks for structural repair.
Applications
TX3 has an extended pot life for larger repairs
requiring more working time.
• Fill pin holes and small surface defects
before polishing
• Rebuilding control joints
• Shallow spalls on bridge decks
• Traffic area spalls & crack repairs
• Structural Crack Injection
• Floor repair
• Stops additional damage
• Fill & repair spall before coating
• Used to “knit” cracked slabs
• Fill voids under concrete or tile
Advantages
• 100% Solids
• Meets USDA and FDA Requirements
• Meets the USGBC’s LEED® requirement of IEQ
Credit 4.1
• Cures From -20ºF to 130ºF
• Drive-Over in 45 minutes
• Produces High Strength Quickly
• Optimal shore D hardness range for strength, wear
and tear
• Self-leveling
• Self Priming
• Can be mixed with dry aggregate